| Simple
assembly instructions:
#1 Cut the
rectangular "bottom of bag" out of sack. This will give
you a flat piece of paper. See figure 1 below:
#2 Once you have
the bag open and now have a flat piece of paper, lay your book on the open
bag and cut bag 3" larger than book. see figure 2 below:
 #3
fold top and bottom of bag to make same size of the book height: see
figure 3 below: tip: use book as a template for size 
After
you have folded the paper bag to the size of the book, the left and right
folds of the book cover form a pocket for you to slip the front and back
cover of your actual book into. #4
lay the book cover flat & lay it on top of flat fabric on table top
and use as a pattern to cut the fabric to same size of cover. Cut
the fabric the same size as the flat book cover folded as shown in fig. 3. Next,
slip your book into the pockets. If necessary, use transparent tape
to fortify the pocket portion of the book cover. #4
Using fabric glue, adhere the fabric to the book cover (with book already
inserted). Generously squeeze glue around the back parameter of the
fabric then match edges with the book cover and adhere. #5
Let dry for at least an hour before using. #6 YOU'RE
DONE!
Tip: make 3 or 4 of these and stack them up as a decorative
touch on a desktop, night stand, etc. |
